1.This paper first analyses IEEE Standard Signing Method for a Bi-directional Parallel Peripheral Interface for Personal Computer (simply called IEEE Std. 1284-1994). IEEE 1284 peripheral interface controller, W91284PIC produced by Warp Nine Engineering Corp, and IEEE 1284 transceiver, SN74LV161284 produced by Tl Corp are used to realize this kind of standard peripheral interface circuit.
本文首先对"IEEE Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal Computers"(简称IEEE 1284-1994标准)进行了分析，然后采用美国Warp Nine Engineering公司生产的IEEE 1284外设端接门控制器W91284PIC和TI公司生产的IEEE 1284总线收发器SN74LV161284实现了这种标准的外设端接口电路。
2.WARP was undertaken because the Clinton Administration signed the Comprehensive Test Ban Treaty [CTBT], and even though the CTBT has never been ratified by the US Senate, the administration unilaterally decided to forego future full scale testing of nuclear weapons for any purpose. Whereupon, Congress required that the President certify annually that the US had no need to test nuclear weapons for any purpose.
WARP是克林顿政府标榜的“广泛禁止核试验条约”(CTBT)的具体实施者，甚至CTBT也从未被美国参院批准过，政府已单方面停止在未来以任何目的进行大规模核武器试验，因此，国会已要求总统每年保证，美国不进行任何目的的核试验。?
3.The article briefly reviews the popular MEKO design concept of vessels at first, then introduces the origin and background of a new type of combined propulsion plant CODAG+WARP.
首先简要回顾了当今世界上比较流行的MEKO舰船设计方法,介绍了新型联合动力装置CODAG+WARP的由来及背景。
4.A New Quick Time Way of Volume Rendering Based on 3D Texture Mapping and Shear-warp Transformation
一个新的基于3D纹理映射及Shear-warp变换的快速体绘制方法
5.After introducing the new corvette MEKO A-200 for South Africa Navy,the article analyses the characteristics of CODAG+WARP propulsion plant. In the end of the paper a conclusion is made.
在介绍南非海军轻型隐身护卫舰MEKO A-200 SAN基本情况后,详细分析了CODAG+WARP动力装置的特点,并进行了小结。
6.The necessity of research on distributed simulation is discussed and then the basic ideasof three notable distributed simulation algorithms are introduced:Chandy-Misra-Bryant algorithm,Time Warp algorithm and Greenberg-Lubachevsky-Mitrani algorithm.
本文论述了分布式离散事件模拟的必要性,介绍了三种重要的分布式离散事件模拟算法的基本思想:CMB 算法、Time Warp 算法和采用递归关系的算法。
7.The result indicates that it will make the loop warp receive less frictional force to settle the basic warp between two loop warps and insert the warp through the dent while the ratio of basic warp to loop warp is 1∶2 in the towel;
结果表明,地经纱与毛经纱排列比为1∶2的毛巾织物将地经纱夹在2根毛经纱中间穿入筘齿可以使毛经纱受到的摩擦阻力小;
8.Secondly,I discuss the tensile and bending performance of multiaxial warp-knitted reinforced composite of high performance fibers,I can see that the tensile of specific strength of Kevlar multiaxial warp-knitted reinforced composite is the great,and the tensile of specific module of Carbon multiaxial warp-knitted reinforced composite is the great in the same resin condition;
其次，又对高性能纤维多轴向经编针织复合材料的拉伸和弯曲实验进行了探讨，得出在同种树脂基体条件下，芳纶多轴向经编复合材料试样的拉伸比强度最大，碳纤维多轴向经编复合材料试样的拉伸比模量最大;
9.This paper introduces the structure, tensile and bending properties of multi-layered biaxial weft knitted(MBWK)fabric, and compares the conformability with that of biaxial warp knitted fabric(0°/90°), multi-axial warp knitted fabric(0°/90°/±45°)and biaxial warp knitted fabric(±45°).
介绍了MBWK织物(纬编双轴向多层衬纱织物)的结构以及拉伸、弯曲等力学性能。 比较了该织物与经编双斜向(±45°)、双轴向(0°/90°)、多轴向(0°/90°/±45°)织物,UD材料及机织物的成型性。
10.Based on the testing of the warp tension on-foreign air-jet looms,the authors analysed the varia-tion of warp tension due to the difference between the reed and cloth width,the inclination of thebeam flange,and the complement of equipment,and finally several measures are put forward forimproving the variation of warp tension.
通过对引进喷气织机的经纱张力测试,分析了由于筘幅与布幅差异,织轴盘片的偏斜以及设备不配套而造成的经纱张力差异,并提出了有关的改进措施。
