1.Casparian strip was frequently regarded as a specific structure of tracheophyta, which appeared as a lignified and suberized narrow zone encircling the radial and transverse walls of the endodermal cells.
凯氏带(Casparian strip or Casaprian band)是维管植物根内皮层的一种特有结构，其主要特征是在内皮层细胞的初生壁上，围绕细胞径向壁和横向壁的木质和栓质的带状结构。
2.The dynamics of intragranular nucleation of ferrite in the low carbon VN alloyed steel under the compact strip production (CSP) is a new research field.
在CSP(Compact Strip Production)工艺条件下低碳钢中铁素体的晶内异质形核动力学是一个新的研究领域。
3.Concerning to the CSP(Compact Strip Plant) production line in Handan Iron and Steel Group Company Limited, the authors give a systematic introduction on the equipment and process of the production line.
本文针对邯钢集团公司连铸连轧厂CSP(Compact Strip Plant)生产线,系统地介绍了生产线的设备及工艺流程。
4.THE APPLICATION OF THE STRIP-LINE TECHNIQUE IN THE FAR INFRARED MAGNETOSPECTROSCOPY OF Ⅳ-Ⅵ SEMICONDUCTORS
STRIP-LINE测量技术在Ⅳ-Ⅵ族半导体远红外磁光光谱中的应用
5.The new wideband microstrip balun proposed in this paper is the first balun that adopts two transmission lines, Coplanar Waveguide Ground (CPWG) and Coupled Strip Line (CSL).
本论文首次应用接地共面波导(Coplanar Waveguide Ground，CPWG)和耦合微带线(Coupled Strip Line，CSL)设计了一种新型的宽频带微带巴伦，该类型微带巴伦可以在低相对介电常数的介质板上制作，具有结构紧凑、成本低廉、制作简单的特点。
6.Our main Products Consist of: Strip steel, strip saw, cutter strip for Skiving machine, cutter strip for splitting machine, EVA cutter, strip cutter for sponge machine, strip cutter for paper cutting machine, and diversified circular strip cutters.
我们的主要产品包括:带钢、带钢锯刀带刮削器,带分裂刀机长荣刀、海绵刀带机、带纸刀切割机、圆带刀具多元化.
7.Aiming at the coal under the building, rail and water, difficultly-mined coal and the side of strip mine, hardly mined, but it is utilization for the UCG study on field test of air coal gas, water coal gas, rich oxygen coal on the side of strip the side of strip mine mine of Fu Xin, Using the UCG for the mineral well, getting the method for building stove of UCG, obtain different coal gas group and heat value for the different gasification craft high volatile, multiple thin coal seams on the side of strip mine are suitable to underground coal gasification to produce middle low heat value gas.
摘要针对“三下”煤层，难采煤层，复杂煤层以及露天边坡剩余的煤炭资源，并工开采不经济或难以开采，可利用煤炭地下气化将这些残余资源得以回收利用，试验利用矿井式煤炭地下气化方式，对阜新矿露天边坡进行了空气煤气、水煤气、富氧煤气的工业性试验研究，通过煤炭地下气化工业性试验，得出在露天边坡矿井式气化建炉方式，不同气化工艺的煤气组分，热值。
8.AbstractThe 2.5～7.0mm thick strip steel with 1.5～3.0 mm height longitudinal ribs is produc ed by φ300 mm mill,The effecf of reduction,thickness of raw strip and finished strip and b_0/b_1 on the height of ribs,rolling force and,torque have been investigated and the distribution of height of ribs along with the width of strip is obtained as well.
用φ300mm轧机轧制基板厚度2．5～7．0mm、筋高1．5～3．0mm的纵凸筋钢板，得到筋底压下率、坯料和基板厚度、b＿0／b＿1对筋高、轧制力、力矩等的影响规律，以及筋高沿宽向的分布规律等。
9.This paper includes outline of LINAC BPM systems, proposal for HLS HLS LINAC BPM system, theoretical analysis of strip line BPM, design of strip line BPM electrodes, developing of BPM signal processing system, mapping of strip line BPM system, and on-line measurement experiment of strip line BPM system.
本论文的内容包括以下几点：直线加速器BPM系统概述、HLS直线加速器BPM系统方案的确定、条带BPM特性的理论分析、条带BPM探头结构的设计、BPM信号处理系统的研制、条带BPM系统的标定以及在线测量实验。
10.Based on an analysis of shape control system of CVC hot strip rolling process in a certain stand mill, a strip shape control simulation software was developed according to actual technological process and applied to the off-line simulation of strip control complying with a certain rolling schedule and the result showed that the strip crown can be controlled in target zone.
摘要通过对某厂CVC热轧带钢板形控制系统的分析和研究，开发了符合实际生产工艺要求的板形控制仿真软件，并对实际生产中某轧制规程板形控制过程进行离线模拟，板凸度仿真结果可控制在目标范围之内。
