1.The characteristics simulation results of tunnel diodeoscillator and 3 tμm E/E NMOS circuit by using this modified SPICE program demon-strate the above-mentioned superiority of this new device modeling.
采用这种改进的SPICE程序对隧道二极管振荡电路和 3μm E/E NMOS电路的特性模拟结果显示了这种新器件模型的上述优越性.
2.Research of SPICE Model for a-Si:H TFT
a-Si：H TFT SPICE模型的研究
3.The accuracy is validated by SPICE macro-model of SET.
SET的SPICE宏模型验证了设计的正确性.
4.It can quickly and accurately determine β_0 ,θ, R_T, D_(it), and the MOS modeling parameters of SPICE 2G5.The experimental results of LDD and other short-channel MOS devices show that this technique has strong abilities for immunity and is an effective CAM means for LSI MOS circuit fabrication.
它能快速而又精确地提取短沟道MOS器件的源漏串联电阻R_T、表面迁移率μ_0、迁移率退化因子θ、阈值电压V_T、平均表面态密度D_(it)等SPICE模拟程序中的模型参数. 对LDD、硅栅CMOS等短沟道MOS器件测试结果表明它还具有抗干扰能力强之特点,是一种LSI-MOS电路制造的有效的CAM手段.
5.So the Curtice modeland the Statz model in SPICE or PSPICE circuit simulation program is most widely used forGaAs IC design.
因此在电路模拟程序SPICE或PSPICE中通常采用Curtice模型和Statz模型。
6.The most famous of them are: Capability Maturity Model(CMM) and Capability Maturity Model integration (CMMI) by CMU/SEI; Evaluation of software process: ISO 15504(SPICE, Software Process Improvement and Capability Determination); Criterion of quality control: ISO 9001;
其中最著名的软件过程改进方法包括:软件工程研究所的软件能力成熟度模型(CMM)和能力成熟度模型集成(CMMI)、用于软件过程评估的ISO 15504标准(通常称为SPICE)、国际标准化组织的ISO 9001质量管理标准,以及电信公司联盟开发的Trillium模型等。
7.The evaluation of the model can be done by the use of popular electrical or electrical/logical simulators like SPICE, SCEPTRE, SPLICE,and DIANA etc.
模型本身可用多种通用电路分析程序来分析,如SPICE,SCEPTRE,SPLICE,DIANA等。
8.A DC SPICE Macro-model for GaN HEMT
一种基于GaN HEMT直流特性的SPICE宏模型
9.Using the MOS linear composite cell, the CMOS transconductance operational amplifier is designed. The linearization principle of the design is distinct and the circuit structure is simple. SPICE simulation results show that for ±5 V voltage supply and less than 1% nonlinearity error the maximum differential input voltage range is 8 V(peak to peak), and -3 dB bandwidth is 10 MHz.
利用MOS管组合线性单元，设计一种CMOS跨导运算放大器，其线性补偿原理清晰，电路结构简单．SPICE模拟结果表明：在±5V电源及非线性误差小于1％条件下差模输入电压范围达8V（峰－峰值），－3dB带宽达10MHz，增益受片外电压控制，可以连续调节
10.Don"t believe everything that a SPICE program spits out.
不要相信所有由SPICE程序产生的结果。
