1.The digital one includes SPEC, Verilog coding, simulation, synthesis, floorplan, routeing, static timing analyze and DRC/LVS check.
数字电路设计流程则包括：制定SPEC，Verilog代码编写，仿真，逻辑综合，布局，布线，静态时序综合和DRC／LVS检查。
2.Developing Reliable Algorithmic Programs Using SPEC#
使用SPEC#开发高可靠性的算法程序
3.The testing result of SPEC95 indicates that the miss rate of the BTB with 256 entries is 12.7%, while the BTB with 4K entries is 7.3%. Moreover, as for their prediction accuracy of branch instruction, both of them can reach 90%.
SPEC95测试结果表明：本文所设计的256项和4K项BTB的命中失效率分别为12.7％和7.3％，且两种容量BTB都能够达到90％以上的预测准确率。
4.Discussion about Several Problems on Evaluating X-ray Image According to API SPEC 5L
API SPEC 5L标准射线底片评定过程中的几个问题的探讨
5.Calculation Method of Geometry Factor J to Gear Tooth Bending Strength for API Spec 11E
API Spec 11E 中齿轮抗弯截面模量J的计算
6.Spec 1170 is a memory.
Spec 1170标准已成为记忆。
7.By using this method, it could not only improve the performance and quality of ASD, but also could apply the way of Spec Driven Development.
应用于此方法来提高ASD开发效率和开发品质，并特别针对ASD的实践特性提出规范驱动开发(Spec Driven Development，SDD)的方法。
8.API Spec 6A has been revised and enlarged considerably in its fifteenth edition published in 1986. Strict technical regulation and rigid quality control in manufacturing are taken into consideration in the new edition.
美国石油学会1986年出版的API Spec 6A《井口及采油树装置规范》第15版,与第14版比较,作了较大的修改和增补,对产品的制造提出了严格的技术与质量控制要求。
9.Discussion of API SPEC 5CT Casing and Oil Tube on the Standardized Non-Destructive Inspection Regulations
关于API SPEC 5CT《套管和油管》规范无损检测规定的讨论
