1.base on the chamber oil drive experiment ,develop relative repeat experiment about polymer odd slug, CGD sistym odd slug ,system and CGD combination slug,compare the oil drive effect, optimize and design the slug combination, offer credible experimental and theory gist for lucubrate lease experiment blue print ,numerial modeling and CDG technique.
并在对聚合物单段塞、CDG体系单段塞和CDG体系与聚合物组合段塞进行室内驱油实验研究的基础上，进一步开展相关重复实验，对各种段塞组合的驱油效果进行了综合对比，最终对CDG调驱过程中的段塞组合进行了优化设计。 为矿场试验方案设计、数值模拟及CDG技术的进一步深入研究提供可靠的试验和理论依据。
2.for the waterflooding blocks with the water cut of above 98% , higher recovery efficiency is obtained by injecting polymer slug firstly and then injecting the activated water slug of SLB surfactant than by directly injecting SLB surfactant - polymer compound slug.
对已进行水驱且注入水接近突破的低渗透油层,在采出液含水率达98%以后,先注低分子量聚合物水溶液段塞,后注SLB超低界面张力活性水段塞,将比注入二者的复配体系段塞获得更高的采收率.
3.The flooding fluid consists of a pad slug (polymer/combinational crosslinker concentration in mg/L 1 200/240), a main slug(800/100), and a post slug(1 000/200). Injection into well J 145 of the CDG fluid in amount 3 200 m 3 over 24 days followed by water flood leads to increased oil productivity and dramatically decreased water cut in 3 production wells.
调驱液包括前置段塞 [聚合物 /复合交联剂浓度为 12 0 0 / 2 40mg/L)、主段塞 (80 0 / 10 0 )及后置段塞 (10 0 0 / 2 0 0 ) ,总量 32 0 0m3 ],注入时间 2 4天 ,后续注水。
4.injecting slug ofpolymer(400ppm) and activated water SL-3 (0.1%)slug one after another is 6.3% higherthan that of injecting compound (SL-3, 0.1%+polymer, 400ppm)slug in isotropic artificialcores;
先后注入聚合物(400ppm)和SL-3活性水(0.1%)两个段塞与复配段塞(SL-3, 0.1%+聚合物, 400ppm)相比,提高采收率幅度增加6.30%;
5.A detailed analysis on the characteristics of the solution of the void fraction matched model for the slug-to-annular flow pattern transition at microgravity condition, which is based upon the drift-flux raletionship of slug flow and the momentum balance relationship of smooth annular flow, is presented.
摘要对基于微重力条件下，气／液两相弹状流滑移流率关系和光滑环状流动量平衡关系的弹－环状流转换空隙率匹配模型的解的特徵，进行了深入分析。
6.The spnunky skunk slumped and the stinky slug slouched. Soon they switched and the spunky skunk slouched and the stinky slug slumped.
大胆的小人掉了下来；臭鼻涕虫没精打采。很快它们换了个个儿，大胆的小人没精打采而臭鼻涕虫掉了下来。
7.The use of the plunger as a solid sealing interface between the expanding gas and the liquid slug extremely helps to prevent gas breaking through the slug and decreases the fallback of liquids, which serves to improve the instability of conventional gas lift and efficiently increase the efficiency of lifting liquids.
它在举升气体和被举升液体之间形成一种固体密封界面,使举升过程中的气体滑脱和液体回落大大减少,从而改善了常规气举的不稳定性,使气体的举升效率得以有效提高。
8.So, this slug flow unit model could be used as the basis for further analyzing the flow property of slug flow under rolling condition.
因此，该弹状流单元物理模型是进一步分析摇摆状态下弹状流流动特性的基础。
9.Based on fundamental theory about one-dimensional two-phase flow and the experimental results, the complexed pattern of capillary bubbly slug flow was analyzod and a theoretical formula of axial pressure gradient of the slug flow inside a vertical capillary tube was derived so a pressure correcting method for measured Bubble Size Distribution (BSD) in gas-liquid dispersions was developed.
本文从一维两相流的基本理论出发,分析了毛细管气泡块状流(BSF)的复杂形态,推导出了垂直毛细管内BSF的轴向压力梯度的理论公式。 并在实验基础上,建立了光电毛细探头技术(Ⅰ)测定气泡尺寸分布(BSD)的压力校正方法。
10.Metal Slug 5 - Details are scarce, but expect the next iteration of the Metal Slug series to continue its fine, 2D, shoot-everything gameplay. We love it already.
合金弹头5-介绍比较少，但是希望合金弹头最新作还是继续2D自由射击模式。
