1.The company can provide the drawbench rivet, loose core rivet, ring-shaped rivet, lantern-shaped rivet and non-core rivet and all kind of rivet gun for the customer.
公司能为客户提供拉丝铆钉、抽芯铆钉、环槽铆钉、灯笼型铆钉和无芯连续铆钉及各种铆枪工具。
2.Rivet Holder:Sizes and shapes of bottom rivet holder may be waried as according to custom rivets.
铆合模具：下模铆合模具的尺寸及形状依客户提供。
3.OBJECTIVE: For 252 aerospace rivet-operator noise workers,to research the relations between analysis noise pressure level nature type and exposure rivet-operator noise workers base on recording electrocardiogram(ECG).
目的：通过对航空铆接噪声作业人员252人进行心电图描记，从而分析噪声强度、性质、类型与接触噪声工人心律失常的关系进行研究。
4.The company has profound experience in production of steel, stainless steel or aluminum rivet nuts and blind rivets serial products both in unified thread system and in metric thread system as well as relevant installation tools for rivet nuts.
具有生产钢质、不锈钢质和铝合金等材质的米制、美制、英制铆螺母系列产品和抽芯铆钉系列产品的丰富经验，并同时生产各种型号的铆螺母枪。
5.In this paper, the gain of fatigue strength of interference-fit riveting components compared with conventional riveting components is studied through tests, and the interference-fit filling effect of coronary rivet is estimated.
摘要通过试验，研究了干涉配合铆接试件相对于普通铆接试件疲劳强度的增益，估算了冠状铆钉干涉配合的填充作用。
6.a steeple head rivet
【机】尖头铆钉
7.An Application of PTFE Adhesive Film as a Lubricant of Core-Drawn Rivet
聚四氟乙烯粘结膜作抽芯铆钉润滑剂
8.And the angle of the die is varied from 15 to 55 degrees. Through the data of numerical simulations, some relations between the angle of the die and the quality of the formed head of rivet, and between the angle of the die and quality of the riveting are found out.
本文对15°到55°共9种倾角的铆模使用LS-DYNA软件包进行了有限元数值模拟,通过数值模拟得出了铆模倾角与铆钉镦头成形质量间的关系,以及铆模倾角与铆钉钉杆和铆接试件之间的干涉质量的关系。
9.A tool used to hold one end of a rivet while the opposite end is being hammered to form a head.
铆顶棍用来夹住铆钉的一头，另一头被敲成钉头
10.In the first section, characters of composites riveting coupon with washer and EMR technique and elements of composites damage were analyzed, riveting experimentation was arranged, And Non-Destructive Inspection(NDI) was applied in the rivet hole in order to ensure the quality of hole strictly.
文章第一部分针对带垫圈的复合材料铆接件的特点，结合电磁铆接技术特点及复合材料破坏机理，安排了铆接试验，并通过对初始孔进行损伤检测来严格确保铆接孔的质量。
