1.In this paper, the work|hardening index of the resinous laminated sheet in unidirectional tension are studied with spcc/polymer/spcc and spce/polymer/L4 and the results are also analyzed.
以SPCC/Polymer/SPCC、SPCC/Polymer/L4树脂复合层压金属板材料为研究对象 ,研究了树脂复合层压金属板在单向拉伸时的n值的变化规律 ,并对研究结果进行了分析讨论。
2.Objective:To apply a new method of enhanced polymer one|step staining(EPOS)assay to lymph nodes for micrometastases on patients with supraglottic carcinoma.
目的 :探讨增强多聚物一步染色技术 (enhanced polymer one- step staining,EPOS)在喉癌患者颈清扫术中的应用价值。
3.It is very obvious that bonds influence the mechanical property of the Polymer Bonded Explosives (PBX) greatly. The surface properties of the different kinds of bonds affect their adhesive functions extremely.
塑料粘结炸药(Polymer Bonded eXplosive，PBX)的力学性能是衡量其质量的一项重要指标，PBX中使用的粘结剂显著影响其力学性能。
4.In virtue of the advantages of fiber-reinforced plastic/polymer (FRP), light-weight, high-strength, nice environmental and fatigue resistibility, it has been broadly used in structural strengthening. Recently, a new technology of strengthening structures with near surface mounted FRP has been proposed.
纤维增强塑料(fiber-reinforced plastic/polymer,FRP)以其高强、轻质、抗腐蚀和抗疲劳性能好等诸多优于建筑钢材的特点,在各国被广泛应用于结构加固工程中。
5.STUDIES ON THE AGGRESGATION BEHAVIOUR OF A SIDE-CHAIN LIQUID CRYSTALLINE POLYMER IN LANGMUIR-BLODGETT FILMS
STUDIES ON THE AGGRESGATION BEHAVIOUR OF A SIDE－CHAIN LIQUID CRYSTALLINE POLYMER IN LANGMUIR－BLODGETT FILMS
6.As a new type of strengthening materials, the advanced composite FRP (Fiber Reinforced Polymer/Plastics) has been applied more and more widely at home and abroad due to their good characteristics of lightweight, high tensile strength, easy installation and nocorrosion.
与传统的加固材料相比,FRP(Fiber Reinforced Polymer/Plastics)具有重量轻、强度高、易于施工、耐腐蚀性好等优点。
7.The double-layer devices (ITO/PEDOT/Polymer/Ba/Al) were fabricated. They held low onset voltage (about 4 V). The peaks of electroluminescence (EL) were 494 and 604 nm, and then their maximum brightness values were 598 cd?
应用旋转涂膜的方法制作Pa和Pc的双层器件(ITO/PEDOT/Polymer/Ba/Al),电致发光波长分别为494和604nm,器件均具有较低的启动电压(4V左右),分别在24和15V时达到最大亮度598和203cd?
8.SYNTHESIS OF POLYMER-SUPPORTED PALLADIUM CATALYSTS AND THEIR CATALYTIC BEHAVIOR FOR THE SELECTIVE HYDROGENATION OF MESITYL OXIDE
SYNTHESIS OF POLYMER－SUPPORTED PALLADIUM CATALYSTS AND THEIR CATALYTIC BEHAVIOR FOR THE SELECTIVE HYDROGENATION OF MESITYL OXIDE
9.Many research groups in the world have been studying the magnetotransport of CrO_2. It is found that improved magnetoresistances have been obtained in complexes, such as CrO_2/Cr_2O_3, CrO_2/polymer, CrO_2/TiO_2, etc. All of those indicate that the surface properties take an important part in the magnetotransport of CrO_2 cold-pressed powders.
在CrO_2／Cr_2O_3，CrO_2／polymer，CrO_2／TiO_2等颗粒复合体系中通过调整颗粒界面状态获得了增强的磁电阻效应，说明CrO_2颗粒的表面性质对CrO_2体系的磁输运性质有着重要的影响。
10.PLEDs fabricated with the configuration of ITO/PEDOT/polymer/BCP/Alq/Mg∶Ag showed turn-on voltage of 10.7 and 10V,and they can emit green light with maximum brightness of 109 and 105cd/m~2,respectively.
该聚合物为发光层的结构为ITO/PEDOT/polymer/BCP/Alq/Mg∶Ag的发光二极管起亮电压分别为和10.7和10V,最大亮度为109和105cd/m2。
