1.The bath types, characteristics of various electro deposition methods, and the applied process formulas of common systems (including citric acid system, BNF system, Nylon process, glucose system and ascorbic acid system) were introduced.
介绍了其镀液类型、各种电沉积方法的特点、常用体系(柠檬酸体系、BNF体系、Nylon工艺、葡萄糖体系和抗坏血酸体系)的实用工艺配方。
2.Our company is specialized in supplying all kinds of Terminal block, Switch Test Double Block, Ground Block, Fuse Block, Three-Level Sensor Block with Light, Double Block, Universal Block, Integral Block, nylon cable ties, cable ties, releasable cablle ties, self-locking cable tie, marker calbe ties, flexible pipe, cable marker, expansion nail / plug, wire joint, cable clamp, nail clip, screw on wire connector, self-adhesive tie mount, spiral wrapping band, wire connectors, cable tie mounts, nylon fasteners, cable gland, nylon ties, cable terminal, terminals, Terminal Connector, wiring duct, pre-insulated terminals, cable markers, electrician tools, cabling accessories, plastic cable ties, wire tie, tie wrap, beaded tie wraps, tie wrap adhesive, tie wrap tool, cable, wires, terminal connector, terminal block, nail, nylon cable glands, , PE Tubing and Quick Screw Connector, Circle Nail Cable Clips, Self-adhesive Tie mounts, Expand Nails, Spiral Wrapping Bands, Screw On Wire Connectors, Copper Connecting Terminals, Pre-insulated Electrician Tools, wire connectors, cable tie mounts, nylon fasteners, nylon ties, cable terminal, pre-insulated terminals, cabling accessories, plastic cable ties, wire tie, tie wrap, beaded tie wraps, tie wrap adhesive, tie wrap tool, cable, wires, terminal connector, terminal block, nail, nylon cable glands, cable accessories, wiring Accessories etc. we offer superior product and best service with competitive price.
我们公司是专门供应各种终端块,交换机测试双重座,地面座,保险丝座,三层传感器座轻型双座通用块,积分块,尼龙电缆联系,电缆联系,松解锚索关系自锁式电缆接头,光缆标记关系,软管,电缆标记,膨胀钉/插头,电线接头,电缆钳,夹钉,螺丝电线连接,自粘配合摩,螺旋带包,导线连接器,线缆配合固定座,尼龙紧固件,电缆压盖,尼龙关系,电缆终端,终端,终端连接器,电线导管,预终端绝缘,电缆料,电工工具,电缆配件,塑料电缆联系,配合钢丝,为配合剧情,串珠配合缠上搭胶包裹,包裹配合工具,电缆,电线,终端连接器,终端块,钉,尼龙索腺体,聚乙烯管材及快速接头螺丝,圆钉电缆夹,自粘配合固定座,扩大钉,螺旋带包螺杆导线连接器,铜接线端子,预绝缘电工工具,电线接头,电缆接头固定座,尼龙拉链,尼龙关系,电缆终端,预终端绝缘,电缆配件,塑料电缆联系,配合钢丝,为配合剧情,配合串珠包,搭包胶,配合工具包,电缆,电线,终端连接器,终端块,钉,尼龙腺体电缆,电缆配件,线路配件等,我们提供卓越的产品和最好的服务,具有竞争力的价格.
3.In the paper,Kevlar fiber was modified by anionic grafting of nylon 6.The mechanism and influence of transcrystallization in raw Kevlar fiber reinforced nylon6 copmposites(PA6/KF0)and modified Kevlar fiber reinforced nylon6 copmposites(PA6/KF1) were studied by PLM,so did the crystallization instance.
采用阴离子接枝法对K ev lar纤维(KF)进行改性。 利用偏光显微镜研究了未改性K ev lar纤维(KF 0)和改性K ev lar纤维(KF 1)增强尼龙6复合材料的结晶情况,界面横晶的形成机理及影响因素。
4.STUDY OF THE NYLON 6/NYLON 1010 BLEND Ⅰ. X RAY DIFFRACTION ANALYSIS OF CRYSTALLINE STATE
尼龙-6/尼龙-1010共混体系研究Ⅰ.结晶态的X射线衍射分析
5.A study was made on the influence of length of nylon and polyester fibres on the physical and swelling properties of nylon/NR and polyester/CR composites.
本文就尼龙、聚酯短纤维的长度对尼龙－天然橡胶以及聚酯－氯丁橡胶复合材料的物理性能和溶胀性能的影响进行了理论研究。
6.In order to obtain MC nylon with excellent comprehensive properties, the amount of catalysts must be limited within the fixed range. Reduction of the amount of activator is an effective way to increase the impact toughness of MC nylon.
为保证MC尼龙有良好的综合性能，催化剂用量必须控制在一定的范围内，减少活化剂用量是提高MC尼龙抗冲击强度的有效途径。
7.In the ethyl-cyanoethyl cellulose(ECEC)/Nylon1010/dichloroacetic acid(DCA) system the ethyl-cyanoethyl cellulose/DCA solution phase and the Nylon1010/DCA solution phase are incompatible and it is a biphasic system.
在尼龙1010/乙基氰乙基纤维素/二氯乙酸体系中,尼龙1010/二氯乙酸溶液相与乙基氰乙基纤维素/二氯乙酸溶液相不相容,各自形成相区。
8.Effect of amino end group concentration in nylon-6 on the impact toughness of nylon-6/EVA blends
尼龙6中氨基含量对尼龙6／EVA共混物冲击韧性的影响
9.On the condition of high speed and high load, the worn surface of PAM1/nylon 6 composites was nearly melted and formed comparative uniform transfer on the surface of steel, which accounted for the rather low wear mass loss. The infrared analysis showed that the a small quantity of transition of crystal form from α into γ of nylon and its composites happened during the friction because of the high temperature and strong sheering strength.
在高速高载时，PAM1/尼龙6磨损表面处于粘流态，并在钢环表面形成了连续的转移膜，表现出较好的耐磨损性能，且在高温和强剪切力的作用下，材料基体发生了少量的α晶体向γ晶体的转移。
10.Nylon 6/EPDM/EPDM-g-MAH and Nylon 6/EPDM-g-MAH alloys were prepared by means of melt blending in a double screw extruder. Its water-absorption, mechanical properties and rheological behaviour were investigated.
利用双螺杆挤出机通过熔融共混制备了尼龙6/三元乙丙橡胶(EPDM)/接枝三元乙丙橡胶(EPDM g MAH)和尼龙6/接枝三元乙丙橡胶(EPDM g MAH)塑料合金,并研究测定了其吸水性、力学性能和流变行为。
