1.Skate on the movement mechanics, materials science, and therefore must test equipment and technical strength of the company have more personnel and equipment, and therefore developed "flywheel licence skate" with its sophisticated quality, reasonable price and excellent brand reputation and win the favor of National 10,000 ice-skating rinks, good reputation will help users "flywheel shoes" sweep away all obstacles.
溜冰鞋关系到运动力学、材料科学，因此必须各种测试设备与技术力量，本公司具备以上人员与设备，因此所开发的“飞轮牌溜冰鞋”以其精良的品质、合理的价位、优良的品牌信誉，赢得全国近万家溜冰场的青睐，良好的用户口碑将有助“飞轮鞋”所向披靡。
2.Study on Dynamic Stability of Flywheel Rotor Supported by AMB Based on PID Controller
基于PID控制的主动磁轴承-飞轮转子系统运动稳定性研究
3.The function and characteristics of the EXCITE-designer software developed by AVL Cor-poration were introduced. Aiming at the breakage of flywheel bolts of a vehicle diesel engine,the torsional vibration of crankshaft system was analyzed by this engine simulation software. The improvement measures were brought forward.
介绍了AVL公司开发的发动机模拟软件EXCITE-designer的功能和特点,针对某车用柴油机飞轮螺栓断裂问题,基于该软件对轴系进行了扭振与减振分析,提出了改进措施。
4.By building up the model of flywheel slip energy storage system and emulation, this article proves the electric energy-saving effect got after transformation.
本文通过对飞轮滑差储能系统建模仿真计算出飞轮滑差储能装置的能耗,从而验证了改造后能取得的节电效果。
5.Design of the Die for Forming the Boss of the Flywheel Shell
飞轮壳凸台成形模设计
6.The CMG is different from traditional flywheel systems for singularity problems, and therefore the research on CMG is concentrated on the steering law study for avoiding singularity.
控制力矩陀螺系统不同于传统的飞轮系统,存在奇异问题。 因此控制力矩陀螺系统理论研究工作主要集中在控制力矩陀螺如何避免奇异的控制律问题的研究上。
7.At the rear end of the crankshaft is attached the flywheel, and at the front end are the driving wheels for the timing gears, fan, cooling water and alternator.
曲轴的后端连接着飞轮，前端是连接着定时齿轮，风扇，冷却水和交流发电机的驱动轮。
8.This article shows us that there are problems in the present shearer and also shows that as a result of the lack of flywheel moment it is not up to the shear power during the shearer work. All this is concluded by analysing and calculating the actual load of a 2500kN shearer which is now being used at a certain plant of Shanghai.
通过对上海某厂2500kN冲剪机实际剪切负荷的计算分析,表明目前的冲剪机设备,由于飞轮在工作中飞轮力矩偏小,出力不够,从而不能满足剪切能量的需要。
9.The combine harvester is overall 3 packets of period of efficacy are 1 year; 3 packets of period of efficacy are main part 2 years, main part is to point to internal-combustion engine airframe, cylinder housing of casing of lid, flywheel, frame, gear-box, clutch, change gear case of machine, final drive to body.
联合收割机整机三包有效期为1年；主要部件三包有效期为2年，主要部件是指内燃机机体、汽缸盖、飞轮、机架、变速箱箱体、离合器壳体、转向机、最终传动齿轮箱体。
10.The relative aspects regarding the forming of the boss of the flywheel shell was analyzed, and a simple_structure forming die and its working process were introduced.
分析了飞轮壳凸台成形模的有关问题 ,介绍了一种结构简单的成形模及其工作过程
