1.This paper introduces the development history of avionics networking technology, researches fibre channel technology, discusses upper mapping protocol of fibre channel in avionics environment, and proposes an implemented method of FC-LP (fibre channel lightweight protocol).
论文介绍了航空电子网络互联技术发展历程，对光纤通道的核心技术进行了研究，并讨论了航空电子平台光纤通道上层映射协议，提出了航空电子环境FC-LP(fibre channel lightweight protocol)的实现方案。
2.λω × ≤ fibration can be regarded as the categorical semantic model of high order subtyping. Its base category is the special enriched order category with inserter, and its fibre category is the Cartesian closed category with coercion structure.
λω× ≤fibration的基范畴是特殊的带序范畴 ,且有插入子 ,其 fibre范畴是带转换结构的笛卡儿封闭范畴 . λω× ≤ fibration可作为带高阶子类型的多态类型系统的通用范畴论语义模型
3.X and UnixWare operating systems, as well as Asynchronous Transfer Mode, Ethernet, FDDI, Fibre Channel, fast SCSI, SCSI, SCSI-2 and token-ring interfaces.
X和UnixWare操作系统，以及异步传输模式（ATM）、以太网、FDDI、Fibre Channel、快速SCSI、SCSI、SCSI-2和令牌环网接口。
4.Fibre Channel and ATM allow for these different classes of service.
Fibre Channel和ATM允许有这些不同的服务种类。
5.For example, I2O should make it easier for corporations to adopt sophisticated new I/O technology such as ATM, fast Ethernet and Fibre Channel by bringing down the technical and management costs of integrating these technologies into an established network computing environment.
例如，I2O应使各公司更容易采纳复杂的新I/O技术，如ATM、快速以太网和Fibre Channel，这是通过把这些技术与已建立的网络计算环境相结合的技术和管理成本而实现的。
6.Some conclusions are drawn: the compressive strength and flexural strength of cubic specimens of steel fibre reinforced concrete increase with the dosage of steel fibre; without change of dosage of steel fibre, the elastic modulus of steel fibre reinforced concrete increases with the concrete age; steel fibre reinforced concrete is of obvious function in cracking resistance, but there is no obvious function in avoidance of cracking; for both common concrete and steel fibre reinforced concrete, the variation of the internal temperature is different from that of the external temperature before the initial set of concrete, and the internal strain of both two kinds of concrete is great, and, in general, the variation of strain of common concrete is much greater than that of the steel fibre reinforced concrete; after the initial set of concrete, the variation of the internal temperature of both two kinds of concrete is similar to that of the external temperature, and the variation of the internal strain is relatively small.
结果表明：钢纤维混凝土立方体的杭压强度、抗弯强度随着钢纤维掺量的增加而增大；在钢纤维掺量不变的情况下，钢纤维混凝土的抗压弹性模量会随着龄期的增加而提高；钢纤维对混凝土的阻裂作用很明显，而对混凝土起裂的限制作用不明显；在混凝土初凝之前，无论是普通混凝土还是钢纤维混凝土，内部温度的变化规律与外界温度的变化规律不同，并且此阶段混凝土内部应变的变幅很大，普通混凝土应变的变幅要比钢纤维混凝土应变的变幅大得多；在混凝土初凝之后，无论是普通混凝土还是钢纤维混凝土，内部温度的变化规律与外界温度的变化规律相同，并且此阶段混凝土内部应变的变幅很小。
7.We have full product line of fibre? glass forming winsting weaving,products process,and various fibre glass yarn,chopped strand,fibre glass fabric,fibre glass chopped strand mat,fibre glass insulation materials.. We can supply fibreglass products 8000 T per year。
主要产品为各种规格玻璃纤维纺织纱、短切纱]玻璃纤维布、玻璃纤维短切毡、玻璃纤维绝缘套管等。
8.Corporation was established in August 2004, is located in the Six Dynasties ancient capital Xian, relying on strong local research strength, professional production base resin carbon fibre, glass fibre reinforced plastics, the main products of various specifications for carbon fibre, glass fibre steel tubes, widely used in architectural, recreational sports, musical instruments and other industries ;SMC, DMC mould pressing corrosion resistance, withstand high temperatures, electrical insulation products.
公司成立于2004年8月，坐落于六朝古都西安市，依托本地强大的科研实力，专业生产树脂基碳纤维、玻璃纤维增强塑料，主要产品为各种规格的碳纤维、玻璃纤维管材，广泛用于建筑装饰，体育休闲、乐器等行业；SMC、DMC模压耐腐蚀，耐高温、绝缘电工制品。
9.By comparison of the test between C 4 card and FA201 cards,the author points out that the short fibre content in C 4 card sliver is higher became there are more 6 mm short fibre in short fibre content,which does not influence the yarn qualities much.
通过C4 型梳棉机和FA201 型梳棉机大面积对比实验发现，C4 型梳棉机生条短绒多主要是6mm 长的短纤维含量高，但对成纱质量无显著影响；
10.The results show that the top fibre length, coefficient of variation of fibre length, short fibre content and combing noil can be predicted successfully.
模型测试表明模型对毛条纤维的长度、长度变异系数、短纤维含量和加工过程精梳落毛率等指标均能进行较为准确的预测。
