1.The specific method is as follows: NS8 series programmable terminal (PT) communicates with CJ1M-CPU23 programmable controller by RS-232C. CJ1M-CPU23 programmable controller connects with CJ1M-CPU13 programmable controller in Controller Link network connection. CJ1M-CPU13 programmable controller connects with CPM2A programmable controller in Device-Net network connection.
实现监控实验通信网络具体连接方式为:NS8系列可编程终端(PT)与CJ1M-CPU23可编程控制器之间通过RS-232C串行通信,CJ1M-CPU23可编程控制器与CJ1M-CPU13可编程控制器之间采用Controller Link网络连接,CJ1M-CPU13可编程控制器与CPM2A可编程控制器之间采用Device-Net网络连接。
2.The main original contributions of this dissertation include:* Constructing an Overlay Network consisting of GSC (Group Security Controller) and multiple SGSCs (SubGroup Security Controller) and proposing a key management scheme named MKEM (Multicast KEy Management), which is applicable for large dynamic multicast groups.
主要创新成果包括：* 在构建由GSC（Group Security Controller）和多个SGSC（Sub-Group Security Controller）组成的覆盖网络的基础上提出了适用于大型动态组播群组的密钥管理方案MKEM（Multicast KEy Management）。
3.Examples of the IP core we used are the following: FIR digital filter provided by Altera Corp. SDRAM Controller，AT96 BUS Controller and 1024 point-FFT produced by Xilinx Corp.
这些IP core包括：Altera 公司提供的FIR数字滤波器，SDRAM Controller，AT96BUS Controller和Xilinx公司的1024点的FFT。
4.On the basis of introduce and analysis of the robot controller in domestic and abroad, the DCS based on Controller Area Network (CAN) is discussed hi this paper.
本文在介绍及分析了国内外机器人控制器发展的基础上，主要阐述了一个用于移动机器人基于CAN(Controller Area Network控制器局域网)总线的分布式控制系统。
5.A novel coal gangues on-line recognition and automation selection system based on the ARM (advanced RISC machines) microprocessor and CAN(controller area network) bus is introduced in order to explore a new way for the coal dry selection technique. The design idea of the interface circuits between the ARM microprocessor and the CAN controller is discussed, and the flow chart of the communication between AT91M40800 and SJA1000 is given.
简要介绍了ARM(Advanced RISC Machines)微控制器和CAN(Controller Area Network)总线技术构成的煤矸石在线识别与自动分选系统,给出了ARM微控制器AT91M40800与CAN总线控制器SJA1000之间相连的硬件电路,论述了硬件接口之间的数据通信实现技术,给出了数据通信的软件设计流程。
6.The Base Station Controller is a very important subsystem in GSM, and it is mainly in charge of radio resource management、cell configuration management、power control、hand over, and so on. The hardware of Base Station Controller consists of a number of processor boards, called CE(Control Element), that are interconnected via the DSN(Digital Switching Network).
基站控制器(Base Station Controller)是GSM 中的重要网络子系统,它主要负责无线网络资源的管理,无线小区配置数据的管理,信号功率的控制,定位和切换等,它在功能结构上由一个内部交换网络和连接在该网络上的不同电路模块构成,从计算机的角度看,基站控制器的每个模块就像一台计算机,有其独立的CPU 和内存。
7.The controller network adopts OMRON Controller Link structure and realizes at low cost a flexible data link and data sharing among SYSMAC products, SYSMAC and upper computer.
控制器网络层采用了OMRON的Controller Link网络体系结构，以低成本实现了SYSMAC同类产品之间或SYSMAC与上位计算机之间灵活的数据链接及数据共享功能。
8.Adopt popular soft plug-in package technology, apply CAN (Controller Area NetWork) bus to DNC system communicate, so as to ensure the continuity processed and improve the surface quality of processing component.
采用目前流行的软插件技术,将CAN(Controller Area NetWork)总线应用于DNC系统通信,以保证加工的连续性,提高加工零件的表面质量。
9.Based on the introduction of Model-View-Controller framework theory,two models used to develop Web projects with Java are analyzed emphatically and a new scheme is brought forward. In this scheme the idea of MVC is integrated into the development model of JSP and JavaBean.
在介绍Model-View-Controller(MVC)架构原理的基础上,分析了用Java开发Web系统的两种模式,提出将MVC架构思想融入JSP+JavaBean开发模式的方案。
10.The running status and detected information of the equipment, which come from the machine controller, were received via CAN bus.
利用控制器局域网总线(CAN_Controller Area NetWork)接口接收工程机械控制器传出的设备运行状态和对设备的检测数据;
